View Larger
SLi Bar Fly Mount Wilma SLi Bar Fly Mount Piko SLi Bar Fly Mount Betty  

Bar Fly 4 Max Mount Kit

“Out-front” mount simultaneously mounts larger cycling computers and Lupine Lights (all models)
ITEM No: bar_fly  


Conserve valuable handlebar real estate by mounting your cycling computer and Lupine Light on the same “out-front” mount.  

Compatible with all Lupine Lights using the appropriate "Lupine adapter for GoPro mount," adapter not included.  Please select "Add On" from drop-down below if you don't already have a Lupine GoPro adapter.  Bar Fly 4 Max bundle includes: Computer heads (see below for complete list), GoPro/Finned mount, Di2/EPS mount and Light mount.
In Stock:  Yes
US $40.00
Add on: 

The Bar Fly 4 Max is an “out-front” mount made specifically for larger cycling computers. Modular system mounts the following computers and accessories – Garmin, Polar, Wahoo, Mio, Magellan, Cateye, Powertap, Bryton. GoPro, Di2/EPS junction Box and most lights. 

Compatible with 31.8mm and 35.0mm handlebars.

Computer compatibility:

Garmin Edge Series 200, 500, 510, 520, 800, 810, 1000, Touring
Watches 910XT, 920XT
Polar M450, V650
Mio 500, 505, 505HC
Magellan 315, 505
Powertap Joule
Cateye GPS/Wireless
Bryton 21, 40, 100, 200, 210, 310

Technical Information:
  • Unique shim offers multiple mounting positions
  • Compatible with 31.8 mm and 35.0 mm handlebars
  • Wind Tunnel tested to be the fastest mount in the world, save over 8 seconds per 40 KM
  • 20 Times stronger than competing products
  • Lifetime warranty

Bar Fly Installation:
  1. Use a 3mm hex wrench (2.5mm for SLi mount) to tighten. The proper toque setting is going to be about 1.25 NM. This will likely not register on a torque wrench. WARNING: DO NOT OVER-TIGHTEN the SCREW!
  2. Tighten screw to 1/4 turn past “hand tight or snug” (1.25-1.5Nm).
 Average Rating:  5 Star Rating
 based on 4 Customer Reviews  
Write A Review
   Once we worked out the kinks, outstanding, July 28, 2017  By John (Whitefish, MT)(Verified)
The Bar Fly does as advertised, create space for a light and bike computer off the handle bars, essential for bike packing. It did take a moment, and some head scratching with Bill at Lupine, but the mount was successfully assembled. The key was to thread both the Go-Pro and Garmin, using the long screws, through the same holes at 12 and 6 o'clock. Viola Happy man.
   Barfly Max w/ GoPro mount, May 4, 2017  By Randy (Annville, PA)
Perfect mount to have if your ride has the Jones H-bar and handlebar bag. Too much stuff on top, not a problem with this. The Max is long enough to my Piko R under the handlebars and center bag.
   GoPro adapter, April 26, 2016  By Adrian of Minneapolis, MN (Minneapolis, MN)
I''ve got this adapter to mount my older Piko 900 lumen light underneath K-Edge Garmin mount. It works well. It puts my light in the middle, instead of the offside configuration. I also have Lupine''s handlebar mount, but on my road bike with hydraulic set up it becomes harder to position it where I want it to be. In addition, it gives you more space on handlebars. Some bikers already commented on how they liked my light positioned upfront. I use green filter on Piko any time I ride during the day for increased visibility.
   SLi Bar Fly GoPro mount, November 24, 2015  By Jeff Markham (Elizabethtown, PA)
Picked up two of these mounts from Bill for my road bike and our tandem. Love the ease of quickly switching the new Wilma 7 from one bike to the other, as well as the clean look having the lamp head mounted underneath the garmin computer.
I mounted the lamp head upside down for easy access to the switch (I did not purchase the remote) especially when wearing heavy gloves on those cold night rides.
Love the setup.

Related Products
Neo/Piko/Piko R/Blika/Blika RWilma/Wilma R GoPro Adapter for Piko and Wilma, screw, o-rings
Mount a Piko or Wilma lamp-head on your GoPro
GoPro mount adapter for Betty R
GoPro mount adapter for Betty R
Mount a Betty R lamp-head on your GoPro
ROTLICHT taillight in black
160 Lumens; 2W; Brake light (de-acceleration sensor) and bright light sensor; Runtime 2 - 30 Hours; Anodized black
Barolo kit: Red cover for the ROTLICHT
Prefer reds to whites? We've got you covered!
Rotlicht Seat Rail Mount
ROTLICHT Seat Rail Mount Kit
Mounts all Rotlicht lights below saddle
160 Lumen; 2W; Brake light (de-acceleration sensor) and bright light sensor; Runtime 2 - 30 Hours; Anodized red
160 Lumens; 2W; Brake light (de-acceleration sensor) and bright light sensor; Runtime 2 - 30 Hours; Anodized blue
ROTLICHT Crossbar Rail Mount
Great for swapping ROTLICHT between multiple bike
Rubber attachment strap for Redlight/Rotlicht
Replace lost or broken taillight straps