“Out-front” mount simultaneously mounts smaller cycling computers and Lupine Lights (all models)
CLEAN & FUNCTIONAL
Conserve valuable handlebar real estate by mounting your cycling computer and Lupine Light on the same “out-front” mount.
Compatible with all Lupine Lightsusing the appropriate "Lupine adapter for GoPro mount," adapter not included. Please select "Add On" from drop-down below if you don't already have a Lupine GoPro adapter. Bar Fly 4 Mini bundle includes: Computer heads (see below for complete list), GoPro/Finned mount, Di2/EPS mount and Light mount.
The Bar Fly 4 MINI is an “out-front” mount made specifically for smaller cycling computers. Modular system mounts the following computers and accessories – Garmin, Polar, Wahoo, Mio, Magellan, Cateye, Powertap, Bryton. GoPro, Di2/EPS junction Box and most lights.
Compatible with 31.8mm and 35.0mm handlebars.
Garmin Edge Series 200, 500, 510, 520
Watches 910XT, 920XT
Bryton 100, 300, 310, 330, 530, 10 and One
Unique shim offers multiple mounting positions
Compatible with 31.8 mm and 35.0 mm handlebars
Wind Tunnel tested to be the fastest mount in the world, save over 8 seconds per 40 KM
20 Times stronger than competing products
Bar Fly Installation:
Use a 3mm hex wrench (2.5mm for SLi mount) to tighten. The proper toque setting is going to be about 1.25 NM. This will likely not register on a torque wrench. WARNING: DO NOT OVER-TIGHTEN the SCREW!
Tighten screw to 1/4 turn past “hand tight or snug” (1.25-1.5Nm).