“Out-front” mount simultaneously mounts smaller cycling computers and Lupine Lights (all models)
ITEM No:
Bar_Fly_4_MINI
CLEAN & FUNCTIONAL
Conserve valuable handlebar real estate by mounting your cycling computer and Lupine Light on the same “out-front” mount.
Compatible with all Lupine Lightsusing the appropriate "Lupine adapter for GoPro mount," adapter not included. Please select "Add On" from drop-down below if you don't already have a Lupine GoPro adapter. Bar Fly 4 Mini bundle includes: Computer heads (see below for complete list), GoPro/Finned mount, Di2/EPS mount and Light mount.
The Bar Fly 4 MINI is an “out-front” mount made specifically for smaller cycling computers. Modular system mounts the following computers and accessories – Garmin, Polar, Wahoo, Mio, Magellan, Cateye, Powertap, Bryton. GoPro, Di2/EPS junction Box and most lights.
Compatible with 31.8mm and 35.0mm handlebars.
Computer compatibility:
Garmin Edge Series 200, 500, 510, 520
Watches 910XT, 920XT
Polar M450
Bryton 100, 300, 310, 330, 530, 10 and One
Cateye
Technical Information:
Unique shim offers multiple mounting positions
Compatible with 31.8 mm and 35.0 mm handlebars
Wind Tunnel tested to be the fastest mount in the world, save over 8 seconds per 40 KM
20 Times stronger than competing products
Lifetime warranty
Bar Fly Installation:
Use a 3mm hex wrench (2.5mm for SLi mount) to tighten. The proper toque setting is going to be about 1.25 NM. This will likely not register on a torque wrench. WARNING: DO NOT OVER-TIGHTEN the SCREW!
Tighten screw to 1/4 turn past “hand tight or snug” (1.25-1.5Nm).
