Lupine SL X – the high-performance Hi-beam – for e-bikes with Bosch, Brose, or Shimano drive systems
Sensor-controlled daytime running light with traffic-friendly low beam and up to 1800-lumen high beam
$410.00
The new SL X is safety, safety by day and safety by night. But it is also an extremely powerful lamp, perfect for fast rides and, with up to 1800 lumens of high beam light, it is currently the brightest StVZO-approved (German Road Traffic Reg.) lamp for e-bikes. When you switch to high beam, the SL X opens a daylight corridor far above the glare-free cut-off line and lights up the 9 automotive LEDs of the main headlamp to their maximum. A unique feature here is that the daytime running light is switched on at the same time with significantly increased output. Its 6 LEDs and the ingenious Fresnel lens system increase the light output and create additional close-up illumination with which you can easily master fast descents and technical roots. BOSCH & SHIMANO REQUIRE AN APPOINTMENT WITH YOU LOCAL BIKE SHOP TO ACTIVATE YOUR LIGHT PORT NOTE: Not compatible with Specialized Mahle Motors Compatibility Chart IMPORTANT! Please order the appropriate light cable and possibly Scotchlok connectors.
Included in the Box: SL X lamp head, handlebar mount, Wired remote control, Light cable set with plug connection, Screw with 2x O-ring (black), blanking plug, Instructions.
Overview
Certainly more light for your e-bike
The new SL X is safety, safety by day and safety by night. But it is also an extremely powerful lamp, perfect for fast rides and with up to 1800 lumen high beam it is currently the brightest StVZO-approved lamp for e-bikes.
The best of both worlds
You switch to high beam, the SL X opens a daylight corridor far above the glare-free cut-off line and fires the 9 automotive LEDs of the main headlight to the maximum. Unique here: At the same time, the daytime running lights are switched on with significantly increased performance. Its 6 LEDs and the sophisticated Fresnel lens system increase the light output and create additional close-up illumination with which you can master fast descents and technical root passages in a playful way.
low beam and high beam
The low beam gives you glare-free light and visibility in every situation. Away from the city you switch to high beam with just a push of a button and fire your bike over country roads and demanding trails.
daytime running lights
The daytime running lights of the SL X shine particularly brightly and guarantee the full attention of all road users. The SLX is currently the only StVZO-approved Lupine with a real daytime running light function, tested according to ECE R87.
sensors
The stereo sensor system, which can be adjusted in stages, scans your ambient light in real time and switches your SL X from daytime running lights to low beams in good time. At the same time, the sensors enable the high beam function.
button
With the button clamp specially developed for e-bikes, you always have your lamp under control. It’s child’s play to switch between low beam and high beam or turn your lights off*. The button’s icons light up green or blue, depending on which mode you’re currently in.*Our e-bike lights turn on automatically as soon as the motor is activated.
Milled with precision
The SL X is not only smaller than any comparable lamp, but also uses every millimeter inside the housing. The housing of the SL X is milled from a single piece of aluminum with minimal tolerances.
Built to last
The SL X is not a disposable product: As is typical for Lupine, permanent adhesive solutions are deliberately avoided during the development phase. Our lamps are designed to be easily disassembled, repaired and reassembled.
Lighting for Bosch, Brose and Shimano
Like any of our other e-bike lights, the SL X draws its power directly from the light output of the motor. If you want to know if the SL X is compatible with your engine, click on the following link: compatibility list
Lighting for Bosch, Brose and Shimano
The SL X gets its power like any other of our e-bike lights directly from the light output of the motor. If you want to know if the SL X is compatible with your motor, check the chart below.
until August/2021 won’t be supplied with a plug connection, please order the appropriate light cable
without plug connection here. -> E-bike accessories for cables without plug | Light cable (plug)
For any E-Bike related questions, please contact, George Willets 717-552-6455
Tech Specs
Included
- SL X lamp head
- handlebar mount
- Wired remote control
- Light cable set with plug connection
- Screw with 2x O-ring (black)
- blanking plug
- Instructions
Related categories
GoPro Mounts
Bar Mounts
E-Bike Accessories
Bluetooth/Bluetooth Accessories
Reviews
There are no reviews yet.