SL X for e-bikes

Overview

SL X (25km/h)

Certainly more light for your e-bike

The SL X ensures security, security by day and security by night. With a high beam of up to 2800 lumens, our SL X, which is approved by the German Road Traffic Licensing Authority, also gives you the feeling of absolute safety off the road. For the Giant SyncDrive Pro2, our SL X is even available with an unbelievable 3600 lumen high beam!

High beam – The best of both worlds

You switch to high beam, the SL X opens a daylight corridor far above the glare-free cut-off line and fires the 13 automotive LEDs of the main headlight to the maximum. Unique here: At the same time, the daytime running lights are switched on with significantly increased performance. 10 LEDs and the sophisticated Fresnel lens system increase the light output and create additional close-up illumination with which you can master fast descents and technical root passages in a playful way.

Low beam – visibility and safety

900 lumens strong and completely glare-free, that makes it your reliable companion. Keep an eye on everything at all times and at the same time increase your visibility for other road users without dazzling oncoming traffic.

Light is mandatory

Daytime running lights have been mandatory for e-bikes in Switzerland since April 2022, as they increase visibility in road traffic and thus also significantly reduce the risk of accidents. If the SL X’s daytime driving mode is active, the 10 LEDs on the side ensure your safety. The SL X is currently the only StVZO-approved Lupine with a real daytime running light function, tested according to ECE R87.

Waterproof and impact resistant

Especially with permanently mounted lights, it can happen that your bike with the light is standing in the rain or it gets hit when you fall. Therefore, the SL X is waterproof and impact-resistant according to IP68.

Sensor controlled

The stereo sensor system, which can be adjusted in stages, scans your ambient light in real time and switches your SL X from daytime running lights to low beam in good time when darkness falls. If the low beam is active, you can switch to the high beam with the wired remote control.

remote control

With the remote control specially developed for e-bikes, you always have your lamp under control. It sits right next to your handlebar grip, so you can switch between low beam and high beam quickly and easily with the push of a button or switch off your lights if necessary. The button’s symbols light up green or blue, depending on which mode you are currently in.

Milled with precision

The SL X is not only smaller than any comparable lamp in its segment, but also uses every millimeter of its housing. This is milled from a piece of aluminum with minimal tolerances.

Built to last

The SL X is not a disposable product: as is typical for Lupine, permanent adhesive solutions are deliberately avoided during the development phase. Our lamps are designed to be easily disassembled, repaired and reassembled.

future proof

Does your new e-bike provide more power for the light output than your old one? Simply adapt the settings of your SL X to the technical possibilities of your e-bike and always get the maximum luminosity out of it in the future.

18W: 1700 lumens max
22W: 2100 lumens max
26W: 2500 lumens max

30W: 2800 lumens max.

Like any of our other e-bike lights, the SL X draws its power directly from the light output of the motor. If you want to know if the SL X is compatible with your engine, click on the following link: Compatibility List